? epcos ag 2007. reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos prior express consent is prohibited. saw components saw rx filter cdma450 series/type: ordering code: B4960 b39471B4960u510 date: version: july 09, 2007 2.1
2 july 09, 2007 B4960 465.00 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx filter data sheet application n low-loss if filter for cdma450 systems, receive path (rx) n unbalanced to balanced operation n low amplitude ripple n usable passband 5 mhz features n package size 3.0 x 3.0 x 1.1 mm 3 n package code dcc6d n rohs compatible n approximate weight 0.037 g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) pin configuration n 2 input unbalanced n 4,6 output balanced n 1,3,5 to be grounded
3 july 09, 2007 B4960 465.00 mhz saw components saw rx filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +85 ?c terminating source impedance: z s =50 w terminating load impedance: z l = 100 w min. typ. @ 25 ?c max. center frequency f c 465.00 mhz maximum insertion attenuation a max 462.5 ... 467.5 mhz 2.3 2.7 1) 1) 2.5db max for -10?c to +85?c db amplitude ripple (p-p) da 462.5 ... 467.5 mhz 0.7 1.0 db input vswr 462.5 ... 467.5 mhz 1.5 1.9 output vswr 462.5 ... 467.5 mhz 1.5 1.9 output amplitude balance (|s 31 /s 21 |) 462.5 ... 467.5 mhz C0.5 C0.2/+0.3 0.5 db output phase balance ( f (s 31 ) C f (s 21 )+180?) 462.5 ... 467.5 mhz C3 C2/+4 5 ? attenuation a 0.5 ... 440.0 mhz 55 62 db 440.0 ... 452.5 mhz 40 48 db 452.5 ... 457.5 mhz 30 33 db 485.0 ... 495.0 mhz 23 33 db 495.0 ... 530.0 mhz 42 50 db 530.0 ... 1200.0 mhz 48 52 db 1200.0 ... 1500.0 mhz 40 50 db 1500.0 ... 3000.0 mhz 30 32 db
4 july 09, 2007 B4960 465.00 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx filter data sheet maximum ratings operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 50 1) 1) acc. to jesd22-a115a (machine model), 10 negative & 10 positive pulses. v machine model, 10 pulses input power at cdma450 p in 17 dbm cw
5 july 09, 2007 B4960 465.00 mhz saw components saw rx filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function transfer function (wideband)
6 july 09, 2007 B4960 465.00 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rx filter data sheet smith charts s 11 function s 22 function
7 july 09, 2007 B4960 465.00 mhz saw components saw rx filter data sheet please read cautions and warnings and important notes at the end of this document. references type B4960 ordering code b39471B4960u510 marking and package c61157-a7-a68 packaging f61074-v8168-z000 date codes l_1126 s-parameters B4960_nb.s3p B4960_wb.s3p soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag surface acoustic wave components division p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2007. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
8 july 09, 2007 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incum- bent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of passive electronic compo- nents or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer appli- cations in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic compo- nent. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be avail- able. 6. unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, ceradiode, cssp, phasecap, phasemod, sifi, sikorel, silver- cap, simid, siov, sip5d, sip5k, topcap, ultracap, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
